Floor mounting profiles for long-side handled beam-mounted unit, 600 kg, 70% & 100%
Floor mounting profiles for beam-mounted pull-out units, fitting a long-side handled unit at 600 kg with 70% and 100% extension. Made from steel, they support the unit at floor level while retaining the standard pull-out mechanism for safe, ergonomic access without a rack beam.
Description
The Smart Storing Floor Mounting Profiles for beam-mounted pull-out units are an accessory that lets a beam-mounted pull-out unit be installed at floor level, built for warehouse teams who need a pull-out unit without an overhead rack beam. The profiles support the unit directly on the floor while retaining the standard pull-out mechanism.
The profiles are made from steel and are matched to the Smart Storing beam-mounted pull-out unit range, available in versions for short-side handled units at 200 kg and 100% extension and long-side handled units at 600 kg with 70% and 100% extension. They carry the lower frame so the upper frame can run out on its ball bearings.
Floor mounting profiles give the same safe, ergonomic pallet access as a rack-mounted unit in locations where pallet racking is not used. The unit still locks when pushed back and is delivered ready to install.
Floor mounting profiles suit automotive manufacturing, workshop and maintenance, warehouse and distribution, and production logistics where a pull-out unit is needed at floor level.
Minimum Quantity Needed :
